| STANDARD TESTS |
DESCRIPTION |
CONTACT |
| 10 CFR 50 |
Fire Tests of
Penetration Seals, Protective Envelope and Flexible Barriers |
Barry Badders, (210) 522-3971 |
| 10 CFR 71 |
Package and
Transportation of Radioactive Material |
Barry Badders, (210) 522-3971 |
|
16 CFR, Part 1633 |
Standard for the Flammability (Open Flame) of Mattress Sets |
David Ewan, (210) 522-5469 |
| 16 CFR, Section 1500.45 |
Determining Extremely
Flammable Contents of Self-Pressurized Containers (Similar to ASTM D 3065) |
Tony Sauceda, (210) 522-3718 |
| 33 CFR/Part 154 Appendix A |
Guidelines for
Detonation Flame Arresters |
Nathan
Weyandt, (210) 522-5483 |
| 33 CFR/Part 154 Appendix B |
Standard Specification for Tank Vent Flame Arresters |
Nathan
Weyandt, (210) 522-5483 |
| ABD 0031 |
Fire-Smoke-Toxicity
(FST) Test Specification (Airbus Industries) |
Amber Faw, (210) 522-3863 |
| AC11 Sect. 5.4 |
Freeze/Thaw Test |
Barry Badders, (210) 522-3971 |
| AC11 Sect. 5.3.5
and Sect. 5.4.5 |
Comparative Bond Test |
Barry Badders, (210) 522-3971 |
| AC24 |
Sections
6.7, 6.9, 6.10, 6.11 Exterior Insulation and Finish System |
Barry Badders, (210) 522-3971 |
|
AC59 |
Direct-applies
Exterior Finish System |
Barry Badders, (210) 522-3971 |
|
AITM 2.0007 |
Determination of the Specific
Optical Smoke Density of Aircraft Interior materials |
Amber Faw, (210) 522-3863 |
|
AITM 3.0005 |
Determination of Specific Gas Components of Smoke Generated by Aircraft
Interior Materials
|
Amber Faw,
(210) 522-3863
|
| ANI/MAERP |
Fire Tests of Protective Envelope Systems |
Barry Badders, (210) 522-3971 |
| ASTM
(Various) |
Flash Point, Open and Closed Cup (and Fire Point) |
Christina Gomez, (210) 522-3280 |
| ASTM C 1166 |
Flame Propagation of
Dense and Cellular Elastomeric Gaskets and Accessories |
Christina Gomez, (210) 522-3280 |
| ASTM D 568 |
Flammability of
Flexible Plastics |
Christina Gomez, (210) 522-3280 |
| ASTM D 635 |
Rate of Burning and/or
Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position |
Christina Gomez, (210) 522-3280 |
| ASTM D 1692 |
Flammability of Plastic
Sheeting and Cellular Plastics |
Christina Gomez, (210) 522-3280 |
| ASTM D 1929 |
Ignition Properties of
Plastics |
Christina Gomez, (210) 522-3280 |
| ASTM D 2015 |
Gross Calorific value of Coal and Coke by
the Adiabatic Bomb Calorimeter |
Christina Gomez, (210) 522-3280 |
| ASTM D
2540 |
Drop-Weight Sensitivity of Liquid Monopropellants |
Nathan
Weyandt, (210) 522-5483 |
| ASTM D 2584 |
Ignition Loss of Cured
Reinforced Resins |
Barry Badders, (210) 522-3971 |
| ASTM D 2859 |
Flammability of
Finished Textile Floor Covering Materials |
Christina Gomez, (210) 522-3280 |
| ASTM D 2863 |
Standard
Test Method for Measuring the Minimum Oxygen Concentration to Support
Candle-Like Combustion of Plastics (Oxygen Index) |
Christina Gomez, (210) 522-3280 |
| ASTM D 3014 |
Flame Height, Time of
Burning, Mass Loss of Rigid Thermoset Cellular Plastics in a Vertical Position |
Christina Gomez, (210) 522-3280 |
| ASTM D 3065 |
Determining Extremely
Flammable and Flammable Contents of Self-Pressurized Containers (Similar to 16 CFR,
Section 1500.45) |
Tony Sauceda, (210) 522-3718 |
| ASTM D 3675 |
ASTM Test for Surface
Flammability of Materials Using a Radiant Energy Source |
Amber Faw, (210) 522-3863 |
|
ASTM D 5485 |
Standard Test Method for Determining the Corrosive Effect of Combustion
Products Using the Cone Corrosimeter |
Christina Gomez, (210) 522-3280 |
| ASTM E 84 |
Surface Burning
Characteristics of Building Materials |
Tony Sauceda, (210) 522-3718 |
| ASTM E 108 |
Fire Tests of Roof Coverings |
Barry Badders, (210) 522-3971 |
| ASTM E 119 |
Fire Tests of Building Construction and
Materials |
Barry Badders, (210) 522-3971 |
| ASTM E 136 |
Behavior of Materials in a Vertical Tube
Furnace at 750°C (1382°F) |
Christina Gomez, (210) 522-3280 |
| ASTM E 152 |
Fire Tests of Door Assemblies |
Barry Badders, (210) 522-3971 |
| ASTM E 162 |
Surface Flammability of Materials Using a
Radiant Heat Energy Source |
Amber Faw, (210) 522-38630 |
| ASTM E
476 |
Thermal Instability of Confined Condensed Phase Systems
(Confinement Test) |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 487 |
Constant-Temperature Stability of Chemical Materials |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 582 |
Minimum Ignition Energy and Quenching Distance in Gaseous
Mixtures |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 648 |
Critical Radiant Flux of Floor Covering
Systems Using a Radiant Heat Energy Source [NIST (NBS) Flooring Radiant Panel] |
Amber Faw, (210) 522-3863 |
|
ASTM E 659 |
Standard Test
Method for Autoignition Temperature of Liquid Chemicals |
Nathan Weyandt, (210)
522-5483 |
| ASTM E 662 |
Specific Optical Density of Smoke
Generated by Solid Materials (Smoke Chamber) |
Amber Faw, (210) 522-3863 |
| ASTM E
680 |
Drop Weight Impact Sensitivity of Solid-Phase Hazardous
Materials |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 681 |
Concentration Limits of Flammability of Chemicals |
Nathan
Weyandt, (210) 522-5483
|
|
ASTM
E 695-97 |
Method
for Measuring Relative Resistance of Wall, Floor, and Roof Constructions
to Impact Loading |
Nathan
Weyandt, (210) 522-5483 |
| ASTM E 771 |
Spontaneous Heating Tendency of Materials |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 789 |
Standard Test Method for Dust Explosions in a 1.2-Litre
Closed Cylindrical Vessel |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 800 |
Gas Sampling Protocol |
Amber Faw, (210) 522-3863 |
| ASTM E 814 |
Fire Tests of Through Penetrations
(Seals) |
Barry Badders, (210) 522-3971 |
| ASTM E
918 |
Standard Practice for Determining Limits of Flammability at
Elevated Temperature and Pressure |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 970 |
Critical Radiant Flux of Exposed Attic
Floor Insulation Using a Radiant Heat Energy Source (Utilizes E 648 test
apparatus-modified) |
Amber Faw, (210) 522-3863 |
| ASTM E
1226 |
Pressure and Rate of Pressure Rise for Combustible Dust |
Nathan
Weyandt, (210) 522-5483
|
|
ASTM
E
1232 |
Temperature
Limit of Flammability of Chemicals |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 1233 |
Structural Performance of Exterior
Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential |
Barry Badders, (210) 522-3971 |
| ASTM E
1273 |
Standard Specification for Tank Vent Flame Arresters |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 1317 |
Flammability of Marine Surface Finishes |
Amber Faw, (210) 522-3863 |
| ASTM E 1321 |
Determining Material Ignition and Flame
Spread Properties |
Amber Faw, (210) 522-3863 |
| ASTM E
1352 |
Cigarette Ignition Resistance of Mock-Up Upholstered Furniture
Assemblies |
Christina Gomez, (210) 522-3280 |
| ASTM E
1353 |
Cigarette Ignition Resistance of Components of Upholstered
Furniture |
Christina Gomez, (210) 522-3280 |
| ASTM E 1354 |
Heat and Visible Smoke Release Rates for
Materials and Products Using an Oxygen Consumption Calorimeter (Cone Calorimeter) |
Christina Gomez, (210) 522-3280 |
| ASTM
E 1491 |
Standard Test Method for Minimum Autoignition Temperature of Dust Clouds |
Nathan
Weyandt, (210) 522-5483 |
| ASTM E
1515 |
Minimum Explosible Concentration of Combustible Dusts |
Nathan
Weyandt, (210) 522-5483
|
| ASTM E 1529 |
Determining Effects of Large Hydrocarbon
Pool Fires on Structural Members and Assemblies |
Barry Badders, (210) 522-3971 |
| ASTM E
1537 |
Fire Testing of Upholstered Furniture |
Tony Sauceda, (210) 522-3718
David Ewan, (210) 522-5469 |
| ASTM E
1590 |
Fire Testing of Mattresses |
David Ewan, (210) 522-5469 |
| ASTM E
1725 |
Fire Tests of Fire-Resistive Barrier Systems for Electrical
System Components |
Barry Badders, (210) 522-3971 |
| ASTM E
1740 |
Determining the Heat Release Rate and Other Fire-Test-Response
Characteristics of Wallcovering Composites Using a Cone Calorimeter |
Christina Gomez, (210) 522-3280 |
| ASTM E
1822 |
Fire Testing of Stacked Chairs |
Tony Sauceda, (210) 522-3718
David Ewan, (210) 522-5469 |
| ASTM E
1966 |
Fire-Resistive Joint Systems |
Barry Badders, (210) 522-3971 |
| ASTM E
1995 |
Measurement of Smoke Obscuration Using a Conical Radiant Source
in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
Amber Faw, (210) 522-3863 |
| ASTM E
2010 |
Positive Pressure Fire Tests of Window Assemblies |
Barry Badders, (210) 522-3971 |
|
ASTM E 2019 |
Standard Test Method for Minimum Ignition
Energy of a Dust Cloud in Air |
Nathan Weyandt, (210) 522-5483 |
|
ASTM E 2021 |
Standard Test Method for Hot-Surface
Ignition Temperature of Dust Layers |
Nathan Weyandt, (210) 522-5483 |
| ASTM
E
2079 |
Limiting Oxygen
(Oxidant) Concentration in Gases and Vapors |
Nathan
Weyandt, (210) 522-5483
|
| ASTM F 1173 |
Fire and Hydrostatic Tests of Composite
Pipe. Similar to IMO A.753(18) |
Jason
Huczek, (210) 522-3632 |
| ASTM
F 1273 |
Standard
Specifications for Tank Vent Flame Arrestors |
Nathan
Weyandt, (210) 522-5483
|
| ASTM F 1387 |
Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
Barry Badders, (210) 522-3971 |
| ASTM
G 72 |
Autogenous
Ignition Temperature of Liquids and Solids in a High-Pressure
Oxygen-Enriched Environment |
Nathan
Weyandt, (210) 522-5483
|
| ASTM G
74 |
Ignition Sensitivity of Materials to Gaseous Fluid Impact |
Nathan
Weyandt, (210) 522-5483
|
|
ASTM
G 125 |
|
